General Torque Settings for our Bikes
Torque for bike components and frame hardware is good to keep an eye on as it’ll mean there’s no chance of you snapping or rounding any bolts or running them too loose and having components fail. These specs are updated occasionally by manufacturers sometimes and for any parts that require specific torque, we’d recommend sticking to the torque specified for that part. Quite often parts such as seatclamps and stem faceplates have a torque printed on them also, if so please torque to the amount given.
| Torque Settings | |
|
Component |
Torque |
Cockpit/Frame |
|
|
Stem Top Cap |
5nm |
|
Stem Clamp |
6nm |
|
Stem Faceplate |
6nm |
|
Seat Clamp |
5nm |
|
Saddle Cradle |
16nm |
|
Front and Rear Axles |
12nm |
Brake System |
|
|
Disc Brake Calipers |
10nm |
|
Rotor (6 Bolt) |
6.2nm |
|
Rotor (Centrelock) |
40nm |
|
Flat Bar Gear Shifter Clamp |
5-7.4nm |
|
Drop Bar Brake Lever |
7-8nm |
|
Cantilever/V-Brake Mounting Bolt |
5.6-7.9nm |
|
Cantilever/v-brake Pinch Bolt |
5.6-7.9nm |
Transmission |
|
|
Front Derailleur Clamp (Braze On) |
5-7nm |
|
Front Derailleur Clamp (Band Clamp) |
5-7nm |
|
Front Derailleur Pinch Bolt |
4.5nm |
|
Rear Derailleur Mount Bolt |
8-10nm |
|
Rear Derailleur Pinch Bolt |
4-5nm |
|
Pedal Axle |
35nm |
|
Chainring Bolt |
10nm |
|
Sram GXP Crank Bolt |
48-54nm |
|
Cassette Lockring Nut |
29.49nm |